Flange sleeve compensator
The sleeve compensator, known as the tubular shrinkable joint, is a compensation device for hot fluid pipeline. It is mainly used for absorption and compensation of axial thermal expansion displacement after the auxiliary installation of linear pipeline. It is a compensator directly installed in any pipeline conveying non corrosive unidirectional or multidirectional fluid. Sleeve compensator It is widely used in transmission pipelines in urban heating, metallurgy, mining, power generation, petrochemical, construction and other industries.
Performance of flange sleeve compensator
1. The sleeve compensator is designed with an anti breaking device, which can ensure that it will not be opened when it expands to the limited position, so as to greatly improve the stability of the operation of the whole pipe network and reduce hidden dangers.
2. The sleeve compensator adopts a new sealing material flexible graphite ring, which has the characteristics of high strength, low friction coefficient, no aging, good effect and convenient maintenance.
Flange sleeve compensator structure
Technical data of flange sleeve compensator
| Nominal Diameter | Compensation Single Way △ | Connection Tube Outer Diameter | Maximum Outer Diameter | Length L | Single Way Friction KN |
| mm | mm | mm | mm | mm | 1.6Mpa |
| 50 | 150 | 57 | 230 | 610 | 1.72 |
| 65 | 150 | 76 | 250 | 610 | 2.68 |
| 80 | 150 | 89 | 265 | 610 | 3.42 |
| 100 | 150 | 108 | 280 | 610 | 4.51 |
| 125 | 150 | 133 | 310 | 610 | 5.23 |
| 150 | 250 | 159 | 335 | 810 | 7.89 |
| 200 | 250 | 219 | 415 | 810 | 13.10 |
| 250 | 250 | 273 | 465 | 860 | 19.5 |
| 300 | 250 | 325 | 520 | 860 | 24.72 |
| 350 | 250 | 377 | 570 | 860 | 29.15 |
| 400 | 300 | 426 | 620 | 970 | 37.63 |
| 450 | 300 | 480 | 670 | 970 | 44.59 |
| 500 | 300 | 530 | 730 | 990 | 52.16 |
| 600 | 300 | 630 | 830 | 990 | 59.47 |
| 700 | 400 | 720 | 930 | 1280 | 65.12 |
| 800 | 400 | 820 | 1030 | 1280 | 78.37 |
| 900 | 400 | 920 | 1135 | 1280 | 96.53 |
| 1000 | 500 | 1020 | 1235 | 1550 | 133.5 |
| 1100 | 500 | 1120 | 1340 | 1550 | 147.21 |
| 1200 | 500 | 1220 | 1440 | 1550 | 158.32 |
Note:Flange supply according to GB/T 9119-2000 standard ,also can supply according to clients’other requirements.
Flange sleeve compensator advantage
1. The service life of the sleeve compensator is long, and the fatigue life is equivalent to that of the pipeline.
2. The sleeve compensator has no requirements for chloride ion content, and is especially suitable for systems with excessive chloride ion in medium or surrounding environment.
3. The sleeve compensator is divided into one-way compensation structure and two-way compensation structure. The two-way compensation structure is characterized in that no matter where the medium flows from the compensator, the sliding sleeves at both ends of the compensator always slide freely to achieve the function of two-way compensation and increase the amount of compensation.
4. The directly buried sleeve compensator can be directly buried underground, and the maintenance well can not be set during installation, so the project cost is low.
Flange sleeve compensator application
Sleeve compensator, also known as tubular expansion joint and pipeline expansion joint, is a compensation device for thermal fluid pipeline. It is mainly used for auxiliary equipment of linear pipeline. Suitable for hot water, steam, grease and other media. Thermal expansion compensation can be realized through the sliding movement of the sliding sleeve.
Product Tags:
|
|
Flange Sleeve Elastic Rotary Compensator DN1000 Carbon Steel Images
|
